Gantry Loader for
Machining Center |
|
■Model:HGL20-RM |
This is
the NC 5-axis Gantry Loader with a Gantry-arm slant axis for the
Vertical Machining Center or the Drilling Machine. Operators can
approach the machine's front, because the interference range is less
than a robot's. The Gantry-arm is telescopic. |
1,Gentry
Model :HGL20-RM (5-axis)
2,Arm Type :Telecospic Arm
3,Parts:Wheel Hub
4,Parts Weight :4.5lb × 4parts |
|
|
|
|
|
Model |
Speed |
Arm
Stroke |
Carrier |
Arm |
Shift |
HGL20-RM |
120m/min |
100m/min |
--- |
1300mm |
|
|
|
|
■Model:HGL30-3S |
This is the NC
3-axis Gantry Loader. The Gantry-arm shift is NC-controlled.
This is for the Machining Center that requires vertical loading
for loading parts. |
1,Gantry
Model:HGL30-3S (3-axis)
2,Parts:Casting CVT cover
3,Parts Weight :6.5lb × 2Parts |
|
|
|
|
|
Model |
Speed |
Arm
Stroke |
Carrier |
Arm |
Shift |
HGL30-3S(W) |
120m/min |
90m/min |
50m/min |
1000mm |
|
|
|
|
|
■Model:HGL30-3SW |
This is the NC 3-axis
Gantry Loader. The Gantry-arm is telescopic, which reduces the
operating height. When the Gantry-arm is in its maximum riser
position, it is half the height of the standard arm stroke. |
1,Gantry
Model :HGL30-3SW (3-axis)
2,Arm Type :Telescopic Arm
3,Parts:Cam Ladder
4,Parts Weight :7.5lb × 2Parts |
|
|
|
|
|
Model |
Speed |
Arm
Stroke |
Carrier |
Arm |
Shift |
HGL30-3S(W) |
120m/min |
90m/min |
50m/min |
1000mm |
|
|
|
|
■Model:HGL150-5ST |
This is the
NC 5-axis Gantry Loader. It has two Gantry-arms. The Gantry-arms
are independent NC-controlled.
|
1,Gantry
Model:HGL150-5ST (5-axis)
2,Parts:Cylinder-Block w/Adapter-Plats
3,Parts
Weight :155lb(each arm) |
|
|
|
|
|
|
Model |
Speed |
Arm
Stroke |
Carrier |
Arm |
Shift |
HGL150-5ST |
120m/min |
90m/min |
50m/min |
1500mm |
|
|
|
|